|Place of Origin:||China,JiangSu,Zhangjiagang|
|Model Number:||RM 12-12-4|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||30 Working Days|
|Delivery Time:||30 Working Days|
|Supply Ability:||16 Sets Per Months|
|Production Name:||5L Plastic Bottle Filling Machine||5L Water Plastic Bottle Filling Machine:||SUS 304 / SUS 316|
|Control:||Touch Screen Control||Warranty:||2 Year For The Filling Spare Parts|
|Suitable Bottle:||5L-10L Bottle|
plastic bottle filling and capping machine,
plastic bottle filler
5L RO System Drinking Water Plastic 5L Bottled Filling Capping Machine Price
Bottle filling machine rear cylinder block has also played, keep an empty bottle into the capping machine. Under the action of the program, filling the cylinder downward movement, so that within the filling valve into the bottle filling, until a certain time to stop filling.
The cylinder block bottles back. Filled bottle into the capping machine, capping machine from the rack, the justifications for cover device, and even the composition of gland. Gland it is connected to the horizontal section of the dump under a certain angle, the constant movement when the bottle, put on caps. Then, the bottles with catchy article closely aligns with the gland, gland play a role.
|1. Production Material: 304 Stainless steel construction , and the liquid contact parts are 316L stainless steel.it is based on you.|
2. Control: Schneider PLC and touch screen control for you
|3. Motor: Servo motor Driven, one servo motor drive one piston, high speed and high accuracy.|
|4. Bottle Filling: No bottle ,no fill, automatic alarm for the warning.|
|5. The filling blocked nozzles are anti drops, silk, and auto cut viscous liquid|
|6. Easy to maintain, no special tools are required.|
|7. Diving nozzles for bottom up filling of foaming products if need|
|8. Bottle mouth can be located if need|
|Number of heads||12 Rinsing heads,12 Filling heads, 4 Capping heads||8 Rinsing heads,8 Filling heads, 3 Capping heads|
|Applicable bottle size||PET bottle|
|Rated Capacity||1000-2000BPH@5L||800-1000 BPH@5L|
|Cap Style||Plastic Screw Cap 40~55mm Neck for PET Small Bottles|
|Washing Drop dryer time||3.4sec|
|Compress air wastage||0.8~1M3/hour||0.6~0.8M3/hour|
|Pressure of washing||0.25-0.3Mpa||0.15-0.25Mpa|
|Pressure of filling||0.15~0.35Mpa||0.1~0.25Mpa|
|Main machine Power||3.0KW||2.0KW|
--- Inside Details Introduction---
|This 5L / 10L bottle water filling machine combines disinfection washing, filling and capping three functions into one assembly line. Mainly used for liquid filling, it is moderate, simple structure, easy maintenance.|
Bottle Filling Machine Bottle Washing.
|Contact Part Material|
|Washing Heads SS 316 /SS 304|
|Filling Heads SS 316 /SS 304|
|Capping Heads SS 316 /SS 304|
|Other Machine Parts : SS 304|
Bottle Filling Machine Bottle Filling.
|1. 304/316 Stainless steel high precision filling nozzle|
|2. Filling volume adjustable in fine rank, same liquid level after filling|
|3. All 304/316 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean|
|4. 304/316 stainless steel filling pump|
|5. Efficient spray nozzle rinse thoroughly and save water for flushing|
Bottle Filling Machine Bottle Capping.
Convenient adjustment: replacement filling specifications only in touch screen can be changed in parameters, and all filling first change in position, fine-tuning dose it in touch screen adjustment.
Bottle Filling Machine Light Check.
|When close to target filling capacity can be applied to realize speed slow filling, prevent the liquid spill bottle mouth cause pollution.|
Bottle Filling Machine Control.
|1. PLC + Touch Screen|
|2. Filling machine parts has a photoelectric detection, when the bottle is only through the Ba, the optical data into information to the PLC, PLC had instructed the cylinder block to block bottles .|
|3. Accurate measurement: adopt servo control system, ensure the piston can always reaches constant position.|
Contact Person: ruilaibo